Skip to main content
Topic: WTB TC performance and blue interior parts (Middletown, DE) (Read 51 times) previous topic - next topic

WTB TC performance and blue interior parts (Middletown, DE)

Looking to buy oem t3 turbo from a four-eye TC, bigger injectors, PIMP ECU (and wideband?), stinger stock turbo location FMIC piping/intercooler, 3" single exit exhaust, etc. Radio replacement insert for gauges (wideband, oil pressure/temp) You get the idea...trying to make 300whp for a nice quick cruiser.

Also looking for good condition black or blue door panels and decent condition center console bits. Maybe eastwood fender roller?

Not interested in: suspension parts, wheels, tires.
'88 Turbocoupe 5 speed.

Re: WTB TC performance and blue interior parts (Middletown, DE)

Reply #1
I have some T3's that were removed from 84-86 Mustang SVO motors. Not sure of condition because I was unable to start them before removing from the cars due to the amount of time they had been sitting.  I would just assume they need to be rebuilt, as I would with any used turbo. I have some of the blue and raven grey door panels from 87-88 Turbo Coupes. Some are just bare panels, but I have some of the other pieces depending on which colors and pieces you need.
I am located in Northern Virginia  about 30 minutes west of D.C.

 

Re: WTB TC performance and blue interior parts (Middletown, DE)

Reply #2
I have some T3's that were removed from 84-86 Mustang SVO motors. Not sure of condition because I was unable to start them before removing from the cars due to the amount of time they had been sitting.  I would just assume they need to be rebuilt, as I would with any used turbo. I have some of the blue and raven grey door panels from 87-88 Turbo Coupes. Some are just bare panels, but I have some of the other pieces depending on which colors and pieces you need.
I am located in Northern Virginia  about 30 minutes west of D.C.

PM'd
'88 Turbocoupe 5 speed.