Skip to main content
Topic: Type 6 (86+ 5.0) Poly Motor Mounts (Read 4795 times) previous topic - next topic

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #15
Quote from: Chuck W;142911


Cougar5.0..do your lower bushings have grooves in them that run the circumference?  I changed bushings, so which ones you have would determine what you need.


yes, they have the grooves...
11.96 @ 118 MPH old 306 KB; 428W coming soon.

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #16
Still have a set of the 5.0 mounts available.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #17
Ready to box and ship the next day.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #18
You know you want 'em...
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #19
Yeh I want them,if still available.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #20
Sorry, you missed them by about a week.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #21
If there is enough interest I'll do some more.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #22
I know I'll take a set,can't keep stocks in mine.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #23
Well I need more than one person interested.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #24
Hey chuck, I finally installed a set of mounts that I bought off you a mighty long time ago...I used them to replace the broken mounts in my '88 XR7, BIG difference!  I love them, cleared my Mac 1 3/4" longtubes and they look great to boot...I love the way they were packaged...part numbers and all!

Thanks again!
-Don
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #25
I want a set. I can paypal you next weekend ish.
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #26
If you are interested in "ordering" a set, you need to send me an email (cwarren@indy.net) with your shipping info, etc.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #27
Well I have parts ordered and one email from interested folks.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #28
As mentioned before, a post here WILL NOT be considered an order.

You MUST email me if you are interested.

Chuck
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #29
I seen them at Carlisle there nice!,Raise the moter up a little.
Lookin forward to gettin a set.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +