Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars WANTED => Topic started by: Moonmount on September 30, 2018, 12:31:01 AM

Title: Driver side manual seat track
Post by: Moonmount on September 30, 2018, 12:31:01 AM
I know theyre auper rare, but I ended up finding one that a junkyard was selling sadly it was cracked. So does anyone have one they dont want? I wish I had a connection in Mexico it seems they were really common there.
Title: Re: Driver side manual seat track
Post by: Haystack on August 03, 2019, 05:29:10 PM
They are way different from the mustang.

I really want a heater only panel to delete the a.c.

I do have a set of manual racks but I am keeping them. Wanna talk about rare, I've also got a set of hand crank and manual mirror doors.

The really rare ones dont have a passenger mirror. Those were only on stripper models.
Title: Re: Driver side manual seat track
Post by: kjohnson1 on August 03, 2019, 08:10:18 PM
how about a bun warmer? just remove the seat bottom cover and place the heating pad.
Title: Re: Driver side manual seat track
Post by: Moonmount on August 07, 2019, 02:02:12 AM
I ended up piecing together a driver set and all in all it cost me about 300. Did pick up a set of doors and manual crank windows which were a lucky find. Now I'm just waiting to come across a T-5 that is reasonably priced. Completely gutted the car, gt brakes, 5 lug, tc front sway bar, mustang rear sway bar, carb swapped, quick ratio rack, 3g upgrade, MM steering rack bushings and steering shaft. I gotta start on the wiring for the lights and gauges. Really need to come across a T-5 swap parts and stop focusing on my other 3 project cars so much.
Title: Re: Driver side manual seat track
Post by: kjohnson1 on August 14, 2019, 05:21:13 AM
I ended up piecing together a driver set and all in all it cost me about 300. Did pick up a set of doors and manual crank windows which were a lucky find. Now I'm just waiting to come across a T-5 that is reasonably priced. Completely gutted the car, gt brakes, 5 lug, tc front sway bar, mustang rear sway bar, carb swapped, quick ratio rack, 3g upgrade, MM steering rack bushings and steering shaft. I gotta start on the wiring for the lights and gauges. Really need to come across a T-5 swap parts and stop focusing on my other 3 project cars so much.
are you wanting to go with a turbo coupe t-5 with the hydraulic clutch?
Title: Re: Driver side manual seat track
Post by: Moonmount on August 14, 2019, 04:32:53 PM
I appreciate it, but I just got a good deal on a rebuilt NWC T-5. Not a big fan of hydraulic clutches