I have a (what started out as an anniversary edition ) modified 302/5spd 3:73 tc rear axle asking 4500.00. pictures upon request this car is not stock but looks like it no nonford mods - just pieces that Ford didn't offer in an 87 v8 cat
ISO harness (i belive injector harness) from 5,0 with digital dash , the sending unit for temp guage will be two wire hard shell connector , also need bracket that holds sun sensor (in center top of dash)
Some time back I:bowdown: saw a post that someone had added a diode to the tach. this was to have it read correctly for a v8, anyone remembers the post? someone mentioned "archive"?
anyone know the configuration of lights on the front of an 87 cougar? I know the center two are a discontinued bulb - but sure something else works. i believe center two are amber? marker/turn are white? turn on fenders is amber? is this correct?:bowdown::D
Anyone Have the armrest part of the doors, not the pad but the part that is the arm rest/map pocket, even damaged may be ok if all parts are there --im going to try and mold some. but neet a correct form.
I also have this vibration, ONLY in 5TH gear, so the clutch.pressure plate,t bearing, and the pilot can be eliminated as the drive shaft and related parts. I have rebuilt hundreds of the std and world class (worked in Ford dealer many years, as a senior master ford tech) and for the life of me cannot visualize what the issue could be, I have read many posts on many different sites sending people on wild goose chases. (I'm sure not on purpose) The only thing that I can think of (at this time) is the tail housing bushing and/ or yoke wear and overdrive puts enough torque to cause the vibration because ALL other gears are fine, if anyone else has a thought PLEASE chime in there may be several things i forgot --as i have been out of the bussiness for 10-15 years now (your mind forgets what is not habit)
Trying to chase a draw in my bk/o circuit (38) from the starter solenoid, with my test light from battery to positive cable I have a blinking light,(thinking CB or relay) I have removed all fuses not change (this circuit is actually on a circuit breaker) if I am reading my book correctly , this wire feeds the ecm (pcm) to the eec power relay . unplugged processor no change . any ideas ??
this car has auto dim wo/keyless entry 1987 20th anniversary
any one have a pic of the inside vacuum connector for manual a/c - i had a couple fall out putting the heater core in --i have a evtm just shows each part not where in the plug and of coures there all black
wanted red door panels , only need armrest area that falls apart , but would look at any model panel, also looking for the quarter badge for the 20th anniversary (black and gold):D