Stock K-Member Dimension Info Thread March 03, 2010, 12:45:52 PM OK,I want to compile some info on stock Tbird and Mustang K-members to help with the continual talking in circles on the subject. K-Members to be discussed:-83-86 Tbird/ Cougar-87-88 Tbird/ Cougar-79-93 Mustang (non-SVO) (I know there are a couple variations)-94-95 Mustang-96-04 MustangDimensions to be noted:A - Control arm lengthB - Width of front control arm mounting holesC - Width of rearward control arm mounting holesD - Vertical height between upper and lower frame mounting pointsE - Width and orientation of lower frame mounting holesF - Ball joint to ball joint width (Not track width, as wheel backspacing/offset will alter this)These dimensions are to ideally be taken from K-members that are not in a car, and thus are easy to get "accurate" measurements from.[COLOR="blue"]For now, when you post in this thread, list the car the K-member is from that you are measuring and list the dimensions you are reporting. I'll compile it all later on and make it a sticky.[/COLOR]If you have any other suggestions or additions, please feel free to mention them, but let's keep this thread clear of clutter and heresay and just report actual data. This should eventually help clear up all the questions and fuzzy, grey areas on what happens when you put different parts together.