Skip to main content
Topic: 84 Tbird project (Read 5973 times) previous topic - next topic

Re: 84 Tbird project

Reply #75
GT40 heads are a nice improvement over the E7s, but I'll use aftermarket aluminum heads next time I put together a windsor based Ford. (leaning to a 32v and getting my feet wet in that bigger, deeper pool).

Car looks, you've done a hell of a lot. Enjoy it!
'84, '87 Mustangs
'98 Explorer 5.0
'06 Explorer EB 4.6
'11 Expedition EL

Re: 84 Tbird project

Reply #76
Started the 11" brake upgrade last week. I went with 94 Mustang GT front struts that I learned have a shorter top bolt about 1/2" shorter than Thunderbird struts. The nut just barely threads on so I modified the strut mount. I ended up cutting a 1/2" out of the spacer in the strut mount.



































While we were bleeding the brakes I discovered the master cylinder was slowly losing pressure so I replaced it.







Now it just needs an alignment and that should finish the 11" brake upgrade.

Today, I decided to start tearing down the motor to install my GT40 heads.













Next is to drop the heads on with fresh gaskets and start reassembly
Matt

1984 Thunderbird - 89 302 HO, GT40 heads with Trick Flow spring kit, Edelbrock Performer 289 intake, Edelbrock 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax mufflers, Mustang AOD and shifter, Mustang 8.8 with 3.73s, and 87+ Mustang 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter with Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax mufflers, 3.27 gears.

1986 Cougar 5.0 (sold)
1989 Mark VII LSC 5 speed (sold)
1980 Mercury Zephyr 4 door (sold)

Re: 84 Tbird project

Reply #77
Started on reassembly!























Matt

1984 Thunderbird - 89 302 HO, GT40 heads with Trick Flow spring kit, Edelbrock Performer 289 intake, Edelbrock 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax mufflers, Mustang AOD and shifter, Mustang 8.8 with 3.73s, and 87+ Mustang 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter with Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax mufflers, 3.27 gears.

1986 Cougar 5.0 (sold)
1989 Mark VII LSC 5 speed (sold)
1980 Mercury Zephyr 4 door (sold)

Re: 84 Tbird project

Reply #78
Finished putting it together and fired it up today!







Also received a visit from the big brown truck.





I picked up a set of the LMR mesh wheels for my Mustang a while back, and I liked them well enough that I got a set for the Thunderbird too. So I'm gonna be listing the TRX wheels for sale soon.



Matt

1984 Thunderbird - 89 302 HO, GT40 heads with Trick Flow spring kit, Edelbrock Performer 289 intake, Edelbrock 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax mufflers, Mustang AOD and shifter, Mustang 8.8 with 3.73s, and 87+ Mustang 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter with Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax mufflers, 3.27 gears.

1986 Cougar 5.0 (sold)
1989 Mark VII LSC 5 speed (sold)
1980 Mercury Zephyr 4 door (sold)

Re: 84 Tbird project

Reply #79
Still have the TRX wheels? I'd be interested in them for my bird
1988 Thunderbird TC:

* SVO T3 .60 / .63
* Esslinger cam gear retarded 4 degrees
* RR Cam
* Ported E6 manifold
* Stinger 3" single exhaust & downpipe
* Stinger FMIC
* Aeromotive Adjustable FPR
* AEM Cone Filter

Re: 84 Tbird project

Reply #80
New wheel pictures?
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Re: 84 Tbird project

Reply #81
Still have the TRX wheels? I'd be interested in them for my bird

I sold them to a member on foureyedpride.

New wheel pictures?

I'll have pics of the new wheels soon. I just got a set of new tires for them, but I gotta get them mounted and balanced then I'll put them on the Thunderbird. I just got over covid so everything got put on the back burner.
Matt

1984 Thunderbird - 89 302 HO, GT40 heads with Trick Flow spring kit, Edelbrock Performer 289 intake, Edelbrock 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax mufflers, Mustang AOD and shifter, Mustang 8.8 with 3.73s, and 87+ Mustang 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter with Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax mufflers, 3.27 gears.

1986 Cougar 5.0 (sold)
1989 Mark VII LSC 5 speed (sold)
1980 Mercury Zephyr 4 door (sold)

Re: 84 Tbird project

Reply #82
Nice work!

Yes, covid really can puppies up one's plans. Kept me from getting a job, but the upside of that is because of the one missed shot at the one place, it put me in a position where I ended up doing something that I really like and pay about .40 more per hour.

I'm still looking for a new (to me) Fox Bird or Mark VII to be a fun car, occasional romp to work in project.

It's out there, just gotta find "the one"..
'84, '87 Mustangs
'98 Explorer 5.0
'06 Explorer EB 4.6
'11 Expedition EL

 

Re: 84 Tbird project

Reply #83
NIce!  Someone's been busy.
1987 TC

Re: 84 Tbird project

Reply #84
Wheels pics are here!

After I sold the TRX wheels I used that money to buy a new set of 245/45-17 Falken Ziex ze950 a/s tires



Then 4 members of our family got covid, and thank God we all survived. My girlfriend's stepdad got it first and it turned into covid pneumonia and sent him to the hospital for 5 days. He was out of work for 6 weeks. Then my girlfriend's mom got it from the stepdad and she got over it within about 3 or 4 days. My girlfriend got it from her mom, and it was pretty much like a bad case of the flu for her. She went back to work after 10 days. I got it from my girlfriend, and it turned into covid pneumonia for me also. I stayed out of the hospital thanks to virtual doctor visits where I got antibiotics and steroids. I was out of work for 3 weeks.

Yesterday I was able to get the tires put on the mesh wheels, and get the mounted on the car.













Matt

1984 Thunderbird - 89 302 HO, GT40 heads with Trick Flow spring kit, Edelbrock Performer 289 intake, Edelbrock 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax mufflers, Mustang AOD and shifter, Mustang 8.8 with 3.73s, and 87+ Mustang 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter with Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax mufflers, 3.27 gears.

1986 Cougar 5.0 (sold)
1989 Mark VII LSC 5 speed (sold)
1980 Mercury Zephyr 4 door (sold)