Skip to main content

Messages

This section allows you to view all Messages made by this member. Note that you can only see Messages made in areas you currently have access to.

Messages - QUICKSHIFT

6
Suspension/Steering / Re: Actual sweet spot on shocks/struts?
Bringing this back from the dead as I’m due for new struts.  Here goes. The car in question is......

84 Cougar, 88 Mustang spindles/ brakes ,and springs that lowered the car 2”.

The question is....

Will SN -95 struts be the perfect solution?

I’ve searched and I get mostly answers for an 88 or the issues with the spacers. According to my research on the dimensions, the SN - 95 seems to fit the bill.
Thanks
7
Electrical Tech / Re: PMGR Starter Issue
Disconnect the start wire to the starter, tape it up and run a temporary jumper wire in it's place to the battery area. When all clear, just touch the wire to the + post and see if the starter works.
10
User Rides / Re: Chuck's '83 TBird




The other issue is that the HI beams are blowing their 20A (mini) fuse whenever I turn them on. Not using anything crazy for the bulbs, but I may need to step of the fuse to a 25A, as it might be the start that's the issue. Everything else works OK.

Lighting is just about wrapped up.


You would be better off doing the relay mod to run the headlights. I did and it's relatively easy.
15
Suspension/Steering / Actual sweet spot on shocks/struts?
Where is the actual sweet spot on a shock or strut. Is it actually at the half way point of travel? How much on either side  of this point is still within range?  Example. If a shock has 6" of travel, is the sweet spot midway at 3" ?  If so, how much on each side of this 3" measurement is still within the sweet spot? Would 1" or 2" on each side still be acceptable? What if a car is lowered 2"? Are the shocks still ideal or should their mounting position be relocated to accommodate that " sweet spot" ?
Thanks.