Sheet Metal Question - Need to Find a Replacement Fender

Topic: Sheet Metal Question - Need to Find a Replacement Fender (Read 4002 times) previous topic - next topic

Sheet Metal Question - Need to Find a Replacement Fender

February 28, 2010, 09:50:48 PM

I need an OEM (no repops) passenger side fender for my 1983 T-Bird. It does not have the cornering lamps. Would a fender from an 83-86 T-Bird or Cougar work? The reason I ask is that I can find several 85-86 Cougar units and just wanted to make sure one would work.

Thanks,

Darren

Sheet Metal Question - Need to Find a Replacement Fender

Reply #1 – February 28, 2010, 09:55:08 PM

83-86 bird and cougar will work its 87-88 that are different but still the same between bird and cougar.

Sheet Metal Question - Need to Find a Replacement Fender

Reply #2 – February 28, 2010, 10:31:44 PM

That is what I thought but I wanted to make sure. These are getting fairly hard to come by anymore. Thanks for the info.

Darren

Sheet Metal Question - Need to Find a Replacement Fender

Reply #3 – February 28, 2010, 10:50:45 PM

If I were you... I would grab an extra set and put them away

Sheet Metal Question - Need to Find a Replacement Fender

Reply #4 – March 01, 2010, 10:40:33 AM

I have thought about that as well. There is a salvage yard back home that has several sets for about $50 a set but who knows what kind of shape they are in. If I can find two rights and one left then I will get them.

Darren

Sheet Metal Question - Need to Find a Replacement Fender

Reply #5 – March 05, 2010, 08:10:52 AM

I need a right front fender for my 1986 cougar also no corner lights, care to share where I might be able to get one. I had people checking but they probably didn't look high and low. :)

Sheet Metal Question - Need to Find a Replacement Fender

Reply #6 – March 05, 2010, 03:57:10 PM

Try http://www.car-part.com. I find all kinds of stuff on there. It's basically the same network the salvage yards use.

Darren