So I'm not 100% on whether or not I'm going to 5 speed swap, but I want to put feelers out for a clutch/brake pedal assembly. Who has one? How much do you need for it? Or at the very least, what should I pay? Just about everything else I need is relatively easy to find, but the pedal seems to be a bit difficult. If I got one, I could at least sit on it and think, or maybe keep gathering parts based on opportunity.
They are now in the $100-$125 range on eBay. Usually a bit rough and sometimes without pedal pads and rust, sometimes hard with none of the electrical. Seen a few go for $200 in good shape with the electrical.
I think it's really high, about 10 years ago my pedals only costed me $40.
My current plan is just to add the tube and a pedal from an sn-95 stang, they are all over the junk yards. The pedal cluster is almost identical between auto and stick minus the tube that the clutch pedal fits in, and as near as I can tell, the parts are very similar from fox to sn-95 years.
For some reason gt pedals go for more, the i-4 ones also work and don't look much different to me.
the clutch pedal arm on the 4 cyl mustang cluster is shorter
I have one if you go that direction
I got mine for around $50, but like above said, that was about 10-15 yrs ago. Nothing gets cheaper.
I have them as well. I'll ship you a set for $110.00
Sold. lets move this to PM so I can figure out how to pay you.
Still looking. Because I wasn't specific to start with, I'm looking for a 5.0 cable clutch style pedal set.
Get a pedal set up out of a Mustang. I used the peddle assembly out of an 86 GT in my 88 Bird when I swapped in the 5.0. Bolted right up and it aligns with the hole in the firewall perfectly.