Skip to main content
Topic: Alpine Deck (Read 594 times) previous topic - next topic

Alpine Deck

Bought a Ford wiring harness, wired it all up for my Alpine Deck, plugged it in everything works lights up plays cd's blah blah blah. But there is no sound coming out of any of the speakers. What do i do with the stock equalizer that's there, i tried it unplugged and plugged in, it appears that absolutely no power is going to the equalizer so i am asumming it is not part of the equation.

Any ideas as to whats going on here?
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

Alpine Deck

Reply #1
Try this,,,,,,,http://www.foxthundercats.net/samscars.htm (look under tech info)
it may help
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )