Skip to main content ↑ ↓
Topic: need help with door! (Read 651 times) previous topic - next topic

need help with door!

How do i get the little caps on either end of the door strap off? I am scared to just pop them off and break them.
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

need help with door!

Reply #1 –
I just pop them out with my pocket knife.

turbo charged 94 Cobra engine/440cc injectors/megasquirt /5 speed swapped (T5)/maxbox upper intake/70mm PP throttle body/AJE coilovers/2003 Mustang control arms/S.T. sway bars/ES rear control arm bushings/11" brake conversion/manual rack conversion/8.8 TC rear with rear discs and a welded diff/3.73 gears/PLX wideband/199mph speedometer/Aeromotive FPR/CNC hydraulic hand brake/cobra R wheels/....ect.

need help with door!

Reply #2 –
What side of the cap to you pry it up from?
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

need help with door!

Reply #3 –
The handle side.

turbo charged 94 Cobra engine/440cc injectors/megasquirt /5 speed swapped (T5)/maxbox upper intake/70mm PP throttle body/AJE coilovers/2003 Mustang control arms/S.T. sway bars/ES rear control arm bushings/11" brake conversion/manual rack conversion/8.8 TC rear with rear discs and a welded diff/3.73 gears/PLX wideband/199mph speedometer/Aeromotive FPR/CNC hydraulic hand brake/cobra R wheels/....ect.
 

need help with door!

Reply #4 –
Okay thank you!
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke: