Skip to main content ↑ ↓

Messages

This section allows you to view all Messages made by this member. Note that you can only see Messages made in areas you currently have access to.

Messages - Moonmount

31
T-Bird/Cougar Parts & Cars WANTED / 8.8 with trac lok
Well I went to change axle bearings on my T-Bird and I poured out the nicest shiniest gear lube. Cross pin bolt has sheared, the cross pin is so worn that its stuck in the rear end and the gears looks like someone spent a few days polishing them down. So I'm gonna save for a overhaul, but in the meantime does anyone have an 8.8 in good shape that they're willing to let go for a good price? I'm located in Camdenton, MO. Thanks, guys
36
User Rides / Re: Moon's workin on stuff thread
little update

I have carb swapped the cougar, gutted the wiring and put together most of the front end just waiting on parts
gotta finish the wiring and install a shifter for the trans. I would like to manual swap, but a manual swap is a lot of money so that's gonna require some saving. Re-doing the exhaust for the umpteen time also.

s-10 air  installed in front of the original lip location. Moog sn95 replacement control arms with Moog fox ball joints installed, new springs, shocks, 11' brakes with SVO rotors. Also reman 15:1 rack installed with MM steering shaft and solid rack bushings. Turbocoupe front bar and mustang rear bar waiting to be installed.

https://imgur.com/a/NYLQltJ



40
T-Bird/Cougar Parts & Cars WANTED / 4 barrel intake
Anyone have one laying around? Willing to trade parts? I've got turbocoupe rear calipers, 93 cobra MC, Mark VII calipers and a bunch of other stuff laying around. PM if you have one and would like to work something out.
44
User Rides / Moon's workin on stuff thread
pulled dash gotta work through the wiring. I'm only wanting to keep my heater and rear defrost. I'm gonna pull out all the wiring for the radio and eventually redo it with as simple and light setup as possible. Any tips or wiring diagrams to help me with this? Also any other tips on what I should do while I've got this pulled apart are greatly appreciated. Just trying to get the car as light as possible

https://imgur.com/a/UCZqdjj