Skip to main content
Topic: Type 6 (86+ 5.0) Poly Motor Mounts (Read 13767 times) previous topic - next topic

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #135
The 83-85s are going to use Mustang mounts. My 5.0 mounts cover 86+.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #136
OK. I have two sets of the Type 6's left.  Once they are gone, that's it. I'm not planning on making any more.

Get 'em while you can.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #137
These are it. When they're gone, they're gone.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #138
One set left.
Long live the 4-eyes!  - '83 Tbird Turbo

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #139
AAANNNNNDD gone.
Long live the 4-eyes!  - '83 Tbird Turbo

 

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #140
So are you done (as in never again) making any kind of motor mounts or shock adapters?

83 351W TKO'd T-Bird on the bottle


93 331 Mustang Coupe - 368 rwhp

Type 6 (86+ 5.0) Poly Motor Mounts

Reply #141
Quote from: Aerocoupe;455900
So are you done (as in never again) making any kind of motor mounts or shock adapters?

Right now I have no plans to get back to this. Too busy.
Long live the 4-eyes!  - '83 Tbird Turbo

Re: Type 6 (86+ 5.0) Poly Motor Mounts

Reply #142
Not sure if anyone is reading this but I’ll give it a a try.  I bought a set of your mounts probably 10+ years ago.  Started the car today and found a pile of dried out bushings underneath.  Jacked the car up and the bushings in the mounts crumbled.  How can I get replacements? I’m in a bind.
Thx
1987 Cougar XR7 308 S/C
Trick Flow Heads/S-Trim/42lb. Inj./Stg. 1 cam/4.10 Detroit Locker,Yukon Axles,T/A Rear End Housing,CHE Upper Control Arms,Chucks Poly motor mounts,
Working A/C -- BBK Shorties/ H-Pipe/ Flowmasters/ Eibach Springs/SSM lift bars/ Max Motorsports subframe connectors/3300 stall convert/ etc....... list keeps going
Lots and Lots of Parts to make you go FAST !!
2008 Mustang GT - - Dark candy Apple Red
Roush Louvers;18" Polished Bullit Rim;3.55 Posi;Hood Scoop;Pypes Exhaust

Re: Type 6 (86+ 5.0) Poly Motor Mounts

Reply #143
Not sure if anyone is reading this but I’ll give it a a try.  I bought a set of your mounts probably 10+ years ago.  Started the car today and found a pile of dried out bushings underneath.  Jacked the car up and the bushings in the mounts crumbled.  How can I get replacements? I’m in a bind.
Thx
Hi.
Typical failure of the 2nd-source poly bushings I tried for a while.

Energy Suspension 9.4102's are the replacements (and the original bushings I used when I started all of this).
They run around $30-35/set everywhere online.

Long live the 4-eyes!  - '83 Tbird Turbo