Skip to main content
Topic: So what does your fox look like today!!!!! (Read 125756 times) previous topic - next topic

So what does your fox look like today!!!!!

I figured this would be fun to see where everyone is at on their builds, I'll start:
:punchballs:
 
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

So what does your fox look like today!!!!!

Reply #1
My pic would not be very exciting...the car is in the garage with a car cover on it.  Hopefully I can take it to the big carshow that is part of my hometowns annual fall festival this weekend.
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

So what does your fox look like today!!!!!

Reply #2
As of this moment:

XXX

So what does your fox look like today!!!!!

Reply #3
Here's mine, drives great after all the suspension mods!!:bowdown:
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

So what does your fox look like today!!!!!

Reply #4
Quote from: cougarman;369264
Here's mine, drives great after all the suspension mods!!:bowdown:

 
Your car is coming along very nicely!  Are you still running the stock rear control arms?  I like the stance on your car.
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

So what does your fox look like today!!!!!

Reply #5
Just brought it home from paint still need to clean the interior and put door panels and hope I have no more bugs to work out. Some one improperly put the u joint together and I almost put the drive shaft through the floor today
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

So what does your fox look like today!!!!!

Reply #6
Quote from: 50tbrd88;369268
Your car is coming along very nicely!  Are you still running the stock rear control arms?  I like the stance on your car.

Thank you, yes I'm running the stock control arms with TC springs and '04 Cobra springs in front. I'm kinda "old school" I like a little rake...lol.
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

So what does your fox look like today!!!!!

Reply #7
still looks like this.... would've had the starter wired today, if i didn't leave my electrical tools on the job today...
Looks like it'll get wired tomorrow...... And then, You know what happens after that..........
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

So what does your fox look like today!!!!!

Reply #8
Daminc, goodluck
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

So what does your fox look like today!!!!!

Reply #9
looks like this
gumby - beauty may fade, but stupid is forever!

So what does your fox look like today!!!!!

Reply #10
Quote from: thewestie;369271
Just brought it home from paint still need to clean the interior and put door panels and hope I have no more bugs to work out. Some one improperly put the u joint together and I almost put the drive shaft through the floor today

 

Westie!!!!!

It's beautiful!!

So what does your fox look like today!!!!!

Reply #11
Quote from: thewestie;369290
Daminc, goodluck

 
Thank you
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

So what does your fox look like today!!!!!

Reply #12
Thanks Flylear I'm hoping to get some help uploading some pics I took along the way. It wasn't as bad as Damincs build but it was enough for me :)
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

So what does your fox look like today!!!!!

Reply #13
Uummmm....I drove it into the garage on Monday at about 4pm.....and here is what it looked like by 9pm.





The SO 5.0L is on the ground supported by the engine hoist.  The HO 5.0L is on the stand awaiting an accessory drive swap then in it will go.  If I didn't have friends coming in on Thursday....well, today I guess, and staying for a few days I would probably have it together by Friday.
1988 T-Bird Sport Coupe--5.0 HO, MAF swap, 1-5/8" shorties, BBK/Flowmaster exhaust, Explorer intake, 70mm Edelbrock TB, T5, B&M short throw, Centerforce clutch and PP, disc brake TC rear w/ 3.55's, TC front brakes, '98 Cobra springs, DIY SFC's, other misc .  14.05 @ 98mph with launching too low and shifting too high.

So what does your fox look like today!!!!!

Reply #14
they should be great help, I think you should have it in late today!!!!
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/