This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.
Messages - mcb82gt
I would incandescant that sucker all day long.
Wanted to edit this since i must be the last person on earth that didnt know and just found out they literally make plug and play goes right into your old headlight socket no cut power to the battery hi/lo relay harnesses for four headlight cars with high temp ceramic plugs so im just going to buy one of those and put that in.
If it comes out nice i get a set for my mustang as well.
I used one of those on sons Crown Vic. Worked really well. When on high beam all 4 lights were 100 watts. Really lit up well.
Interesting.My sons 87 Crown Vic. Put in H1 and H4 glass housings with higher wattage bulbs and a ebay H4 wiring harness. Works amazing. Had to move a couple wires in the wiring plug, but no big deal.
I tried to put in my h4 conversion this weekend and the low beams dimmed significantly when the high beams were used, which also set off the "low beam out" warning light on the dash.
I think i have other issues impeding this on my end.
I took it all back out and put the halogens back in, ill figure that stuff out in the diagrams later when i have time.
I currently have good clear lens with Silverstars and a relay harness for full battery voltage.
button will fall out, along with a spring and the white lil ball. I think once removed, try pushing down inside the handle to get into Drive. Unsure, never tried it.
No need for the bends on a TBird chassis, and the seat braces aren't wide enough.
I keep trying to find something that will work. Guess just rectangle tubing and the seat adapters from the guy making them now. Thanks Chuck!