Skip to main content
Topic: Project Evolution *** Project Complete **** Wednesday July 9, 2014 (Read 1137860 times) previous topic - next topic

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3300
looks amazing Jerry!








1983 FORD THUNDERBIRD HERITAGE 5.0
2008 SAAB 9-7X AERO 6.0 (LS2) 1 0f 554 Made
2011 FORD FLEX SEL Family Hauler

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3301
Man this thread has a lot of pages lol


Clean car !

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3302
I bet there there is no firehawk tracks going out the driveway. What's hanging down in the front of the last pic?,looks like red wires. We got twins now Jerry, except the wheel and tires.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3303
Yea I saw that to

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3304
I pulled the cooler off the aod temporarily. Its the extra slack in the lines
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

 

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3305
Quote from: Kitz Kat;409714
I bet there there is no firehawk tracks going out the driveway

There's never any firehawk tracks leaving the driveway...lol
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3306
At 40 posts per page, I've read thru the last 83 pages on the edge of my seat. Great job saving this car, most would have walked away and let it go to the s yard. I'm also taking notes for my next project and I don't feel as reserved to get a 4 eye bird in rough condition.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3307
not much of an update... but the shifter area is now done




[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3308
Quote from: daminc;414612
not much of an update... but the shifter area is now done






Looks good. You have a gear indicator on the dash correct? What do the other two switches in in the Turbo Coupe antenna plate do ;)? I have one I'm thinking about installing myself. I'm trying to figure out what to make the other switches control.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3309
1 I'm thinking of making an ignition cutoff switch....so obvious no one will ever think to flick the switch to start the car..  I'm also connecting the shifter to the dash gear selector.. needed my boot to see how much room I have to put the old console selector plate on under with some mods to connect to the dash with a cable.

the other switches..... I'm not sure,,, I remember wanting them for some reason 4 years ago.... lol
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3310
If it helps, Jerry...I know that GM G-bodies had a long cable from the floor shifter to the dash gear indicator. You can definitely fab something up.

See here:
http://www.opgi.com/monte-carlo/1986/interior-accessories/dash-accessories/L240713/
http://www.opgi.com/monte-carlo/1986/interior-accessories/console/99L0126/

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3311
Thanks Eric..the Monte is what I had in mind when I thought about doing this
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3312
Dude!!!!!!! Thing looks mint!!!! How ya been!
[/IMG]
Just enjoyin the ride!!!!

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3313
I've been good... Been working on another project
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3314
project complete.......
 here it is getting inspected





[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook