Page 4 of 4 FirstFirst 1234
Results 31 to 33 of 33

Thread: 8.8" swap SN95 vs Lincoln Mark 7

  1. #31
    Join Date
    Oct 2006
    Location
    Jenks, OK
    Posts
    2,339
    Feedback Score
    4 (100%)

    Default

    Did not need adapters on my Bird. Being my car had the small front brakes (10”) I had the 3/8” fitting on the hard lines so these lines worked:

    https://www.maximummotorsports.com/M...ont-P1576.aspx

    If your car started out with the larger brakes up front (11”) and both hard lines have 7/16” fittings then these are what you want:

    https://www.maximummotorsports.com/M...ont-P1341.aspx

    So if your car has one 3/8 and one 7/16 fitting the you will need an adapter. Other nice thing about these kits is they come with fine and coarse thread banjo bolts. This is good because some of the Cobra calipers are fine thread and some are coarse so if you want to upgrade later you will have the correct bolts either way.

  2. #32
    Join Date
    Oct 2005
    Location
    Chestermere, Alberta Canada
    Posts
    542
    Feedback Score
    1 (100%)

    Default

    Man i do not remember if it had 10" or 11" rotors on the front. I did swap to turbocoupe rotors and calipers a long time ago and everything bolted in.
    1988 Thunderbird Sport. No engine, no trans, turbocoupe disk diff with 3:27 gears, 31 spline axles and Cobra clutch packs, Turbocoupe front brakes.

    Bought this car back as an old project car.


  3. #33
    Join Date
    Oct 2004
    Location
    Pasadena, MD
    Posts
    7,503
    Feedback Score
    7 (100%)

    Default

    The Turbo Coupe rotors require the TC/Mustang GT spindles to swap over. All of the non-TC cars got the cute little 10" brakes.
    It's Gumby's fault.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •