Results 1 to 5 of 5

Thread: HR980 compressor and brackets questions

  1. #1
    Join Date
    Mar 2010
    Location
    Mount Juliet, TN
    Posts
    196
    Feedback Score
    3 (100%)

    Unhappy HR980 compressor and brackets questions

    Hello everyone! I have (another) dilemma with my '86 XR-7. I'm trying to get the A/C working and my mechanic found out that the compressor was bad so....found a new OEM HR980 and ordered it BUT, when it got here, we discovered that ONE of the mounting brackets is different than the one that was on my car (see pics below). Here's my question(s): does anyone have any idea what the one with the closed bracket actually fits and whether making it work on my car might be a simple change out of a bracket? I purchased it from someone here on the forum but can't remember who I got it from to ask them about it

    Correct or existing compressor:

    Compressor_correct.jpg

    New (incorrect) compressor/bracket:

    Compressor_wrong.jpg
    1986 Mercury Cougar XR-7 Turbo-charged 5-speed.
    Owned 22 years.

  2. #2
    Join Date
    Oct 2004
    Location
    Gap Mills WV 24941
    Posts
    13,885
    Feedback Score
    14 (100%)

    Default

    I would modify the bracket in the car to accept the new design you have now if need be.

    i am not sure if welding on the pump iteself would be a good idea, but to correct the issue, that would be the proper thing to do.

    what is the OEM pn of your old one vs the new one?

    first two letters like E3,, E4,, E5, E6,,,?

    im thinking your new one might be stamped with E3,, and your old one probably starts / stamped with E5 (1985)

    I think i remember that new on you have there in my 84 coug i had years ago.

  3. #3
    Join Date
    Mar 2010
    Location
    Manassas, VA
    Posts
    422
    Feedback Score
    8 (100%)

    Default

    Just looking at the photo, it looks like you could probably make it fit correctly simply by adding some type of spacer on the front of the bracket so that it has the same spacing as the original or by making some simple modifications to the engine side mounting bracket. Agree with above that it is probably not a good idea to go welding on the compressor housing unless all the insides are removed.

  4. #4
    Join Date
    Oct 2004
    Location
    East Coast Virginia
    Posts
    10,115
    Feedback Score
    0

    Default

    Quote Originally Posted by 50RACER View Post
    Agree with above that it is probably not a good idea to go welding on the compressor housing unless all the insides are removed.
    Not possible, those are welded together...

    - SOLD ----------- SOLD ------------ SOLD --------- PARTED(RIP) --- Yeah It's Got A V8 .
    .................................................. .....................................(Just Not Presently)

    1969 Fairlane Cobra 428CJ 4-Speed

    1972 Comet GT - 306 C4

  5. #5
    Join Date
    Mar 2010
    Location
    Mount Juliet, TN
    Posts
    196
    Feedback Score
    3 (100%)

    Default

    Quote Originally Posted by jcassity View Post
    I would modify the bracket in the car to accept the new design you have now if need be.

    i am not sure if welding on the pump iteself would be a good idea, but to correct the issue, that would be the proper thing to do.

    what is the OEM pn of your old one vs the new one?

    first two letters like E3,, E4,, E5, E6,,,?

    im thinking your new one might be stamped with E3,, and your old one probably starts / stamped with E5 (1985)

    I think i remember that new on you have there in my 84 coug i had years ago.
    Therein lies my problem: The sticker on my OEM is pretty much illegible so I had to go off the model # of the compressor and it would seem that I got the wrong one (Of course Would making this one work be just a matter of changing out the engine side mounting bracket or am I back to the drawing board with trying to find another compressor?
    1986 Mercury Cougar XR-7 Turbo-charged 5-speed.
    Owned 22 years.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •