Results 1 to 3 of 3

Thread: Lower body side stone/rock guard

  1. #1
    Join Date
    Jun 2005
    Location
    Chicago
    Posts
    10,416
    Feedback Score
    17 (100%)

    Default Lower body side stone/rock guard

    Does anyone know how high up the factory stone/rock guard is from the factory on 87-88 cars? The body shop stripped it off the car and I don't remember. I want it to look stock so if someone could check there car I'd appreciate it.
    '88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, Edelbrock 70mm TB, 76mm C&L MAF, 30lb injectors, 2.5" exhaust, AOD with 2800 PI converter, 8.8 with 3.73 gears, 31 spline Traction-Lok, 31 spline Moser axles, 04 Cobra front arms, Maximum Motorsports extreme duty rear arms, subframes.
    '11 Focus, '12 Mustang 3.7, '17 Accord EX-L V6

  2. #2
    Join Date
    May 2005
    Location
    Newmarket, ON, Canada
    Posts
    121
    Feedback Score
    0

    Default

    My 87 TC looks like it goes all the way to the moulding. It's a really light stone guard so it's hard to see especially dirty like mine is right now.

    John

  3. #3
    Join Date
    Jun 2005
    Location
    Chicago
    Posts
    10,416
    Feedback Score
    17 (100%)

    Default

    I thought so. I'll bring a couple pieces of molding to the body shop on Monday so he can measure to just below the moldings. That way the rock guard stops where the molding starts.
    '88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, Edelbrock 70mm TB, 76mm C&L MAF, 30lb injectors, 2.5" exhaust, AOD with 2800 PI converter, 8.8 with 3.73 gears, 31 spline Traction-Lok, 31 spline Moser axles, 04 Cobra front arms, Maximum Motorsports extreme duty rear arms, subframes.
    '11 Focus, '12 Mustang 3.7, '17 Accord EX-L V6

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •