Results 1 to 7 of 7

Thread: CWE Shock Bracket CAD files

  1. #1
    Join Date
    Oct 2004
    Location
    Indpls, IN
    Posts
    8,044
    Feedback Score
    34 (100%)

    Default CWE Shock Bracket CAD files

    OK, so I've been looking to do this for a while, but I've been just busy as hell with everything else going on to do this.

    Here are the CAD (and pdf) files for my shock brackets. ---------> CWE Shock Brackets

    They are older .dxf/dwg files as well as PDF's for those who just want dimensions.

    You need 4 side plates and 2 of everything else for a set.

    Could they be improved? Of course. Have at it if you want to.
    Long live the 4-eyes! - '83 Tbird Turbo

  2. #2
    Join Date
    Oct 2004
    Location
    Huntsville, AL
    Posts
    2,053
    Feedback Score
    2 (100%)

    Default

    Do you have a PN for the stud?

  3. #3
    Join Date
    Oct 2004
    Location
    Indpls, IN
    Posts
    8,044
    Feedback Score
    34 (100%)

    Default

    Quote Originally Posted by JeremyB View Post
    Do you have a PN for the stud?
    I was just using a 1/2"-13 x 1.25" gr8 bolt, but a pressed-in stud would work too. You would just need to size the hole in that plate appropriately for it.
    Long live the 4-eyes! - '83 Tbird Turbo

  4. #4
    Join Date
    Jun 2006
    Location
    Massachusetts
    Posts
    2,279
    Feedback Score
    4 (100%)

    Default

    That's really nice of you for posting.

    I'm sure it'll help future forum members for a long time. I downloaded, in case I ever find another t-bird.

  5. #5
    Join Date
    Oct 2004
    Location
    Pasadena, MD
    Posts
    7,396
    Feedback Score
    7 (100%)

    Default

    You're a good man for posting this.
    It's Gumby's fault.

  6. #6
    Join Date
    Oct 2004
    Location
    Indpls, IN
    Posts
    8,044
    Feedback Score
    34 (100%)

    Default

    If I can find the files, I'll upload the SFC seat braces also.
    Long live the 4-eyes! - '83 Tbird Turbo

  7. #7
    Join Date
    Feb 2012
    Location
    Michigan
    Posts
    76
    Feedback Score
    0

    Default

    I cant seem to be able to download the CAD Files?


    1986 Ford Thunderbird
    !!COMPLETED!! 427 ci ROUSH engine swap<<!NEW! Fed by a Holley Terminator EFI setup/ custom COP setup ignition
    8.8 rear. with 4:10 gears, Eaton Trutrac diff, 31 spline axles and external breather system. Had it cleaned, sandblasted, and powder coated.

    "Its kind of like driving the red headed step child of the mustangs"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •