Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: See what mischief I've been getting into.

  1. #1
    lowcat Guest

    Default See what mischief I've been getting into.

    Well I have been pretty busy lately. Over the past week I have been working on installing airbags on my car. Now I have finished installing and am having fun playing with them. The only problem is my compressor is still backordered so I have to stop at the gas station a lot to fill the tank up. I have put about 200 miles on the car since the completion and have had no problems yet. Also when I did this I installed mustang control arms, ball joints, and tie rod ends. I need to find shorter struts for the front because that is what is holding me up from going any lower. . Anywho I also put new door handles on too but I didn't really feel like making a new thread just for that. And without further delay here are the pics.
    Attached Images Attached Images

  2. #2
    lowcat Guest

    Default Re: See what mischief I've been getting into.

    First one is at about 110 psi, second is all the way down.
    Attached Images Attached Images

  3. #3
    lowcat Guest

    Default Re: See what mischief I've been getting into.

    And more
    Attached Images Attached Images

  4. #4
    lowcat Guest

    Default Re: See what mischief I've been getting into.

    Don't worry, I am getting a front end alignment on Friday April 29th.

    Oh and I should have the back done by May 14th, but don't hold me to it.
    Attached Images Attached Images
    Last edited by lowcat; 04-26-2005 at 05:24 PM.

  5. #5
    Join Date
    Oct 2004
    Location
    Pasadena, MD
    Posts
    7,405
    Feedback Score
    7 (100%)

    Default Re: See what mischief I've been getting into.

    also, since youre CFI, i might have something for ya at the meet

    looks pretty good bro
    It's Gumby's fault.

  6. #6
    Join Date
    Oct 2004
    Location
    NE Ohio
    Posts
    3,702
    Feedback Score
    3 (100%)

    Default Re: See what mischief I've been getting into.

    Damn, that's hot! I've always wanted to do that with a Fox car and now I know it can be done. How much was the whole setup? Also, did you but bags on the rear too, or not? If so it doesn't look like the rear is moving very much.

    Anyway, congrats, that looks incredible.

  7. #7
    Join Date
    Oct 2004
    Location
    Willow River B.C.
    Posts
    1,891
    Feedback Score
    0

    Default Re: See what mischief I've been getting into.

    Lovin that nose in the air gasser stance lol thats awesome, how long total did it take you to do all the work?
    1980 birds X 3, 1982 bird, 1984 XR7, 1988 TC

  8. #8
    lowcat Guest

    Default Re: See what mischief I've been getting into.

    So far I have spent about $800, and no the back isn't done yet. But it will be very soon(I plan on ordering the parts I need tomorrow). It took about a week of working on it after work (1-2 hours a night) and all day Sunday to finish everything. It wouldn't have taken nearly as long if I hadn't changed the control arms. I also got my compressor today, now I can really start having some fun.

  9. #9
    Join Date
    Oct 2004
    Location
    Pasadena, MD
    Posts
    7,405
    Feedback Score
    7 (100%)

    Default Re: See what mischief I've been getting into.

    the rears will be easy

    can you control each bag individually, or is it a front/rear setup?
    It's Gumby's fault.

  10. #10
    lowcat Guest

    Default Re: See what mischief I've been getting into.

    Yup each one can be controlled seperatly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •