Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Removing 87-88 window trim & Re-install-- Step by Step --(updated Aug/30/08)

  1. #11
    Join Date
    Oct 2004
    Location
    Farmingdale, NY
    Posts
    9,052
    Feedback Score
    18 (100%)

    Default

    You ROCK!
    -- 05 Mustang GT-Whipplecharged !! -- 87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's! http://www.fquick.com/V8Demon

  2. #12
    Join Date
    May 2007
    Location
    Grand Island, New York (between Buffalo, Niagara Falls and Ontario, Canada)
    Posts
    8,069
    Feedback Score
    14 (100%)

    Default

    Updated and revised
    please re-read before doing this
    ***** Project "EVOLUTION" 1987 Cougar LS & 1985 Cougar Convertible *****

    5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner mufflers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
    Pretty much every panel on my 87 is new, rebuilt, or re constructed.
    Join us on Facebook

  3. #13
    Join Date
    Aug 2006
    Location
    Two Harbors, MN
    Posts
    2,134
    Feedback Score
    6 (100%)

    Default

    Excellent write up, Jerry. What about painting the door first? lol
    1987 TC project of infinity

  4. #14
    Join Date
    Oct 2004
    Location
    Welland (Niagara Falls), Ontario, Canada
    Posts
    2,147,484,184
    Feedback Score
    1 (100%)

    Default

    Consider this thread sticky! Excellent job!

  5. #15
    Join Date
    May 2007
    Location
    Grand Island, New York (between Buffalo, Niagara Falls and Ontario, Canada)
    Posts
    8,069
    Feedback Score
    14 (100%)

    Default

    Thanks, I figured as long as I changing them over, Why not. could help someone. and I always wondered how to get those vertical trim pieces off.
    As for painting, They're coming off again and being replaced with some mint condition chrome trim after the paint job. I swapped Vinnie his chrome for my rubber trim. everyone wins and no leftovers. LOL

    BTW... If anyone has some input about the previous years, we could adapt this thread for all years.
    ***** Project "EVOLUTION" 1987 Cougar LS & 1985 Cougar Convertible *****

    5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner mufflers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
    Pretty much every panel on my 87 is new, rebuilt, or re constructed.
    Join us on Facebook

  6. #16
    Join Date
    May 2007
    Location
    Grand Island, New York (between Buffalo, Niagara Falls and Ontario, Canada)
    Posts
    8,069
    Feedback Score
    14 (100%)

    Default

    Almost 2 years later, and I have to re-read this thread because I can't remember how to put my doors back together.
    (this was the reason I made this thread. lol)

    I'll revise and update, if I find anything different on the install. I may do a write up for the locks and door handles and any inside wiring/ connecting while I'm in there too.
    ***** Project "EVOLUTION" 1987 Cougar LS & 1985 Cougar Convertible *****

    5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner mufflers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
    Pretty much every panel on my 87 is new, rebuilt, or re constructed.
    Join us on Facebook

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •