PDA

View Full Version : opininons



im gay as hell
07-21-2005, 02:49 PM
i have a choice of buying a rear differntial from a98 mustang from a junkyard for 250 bucks

nowim not 100 percent sure that i can swap the axle from that rearens into mines without and problems but if you guys say its a direct swap then it is but if i buy it and the shit is all beat up inthe casing what thats my ass any advice i really want to convert to 5 lugs

amooset
07-21-2005, 06:17 PM
If you don't want a torn up part, buy it new or rebuilt, plain and simple. Used parts are always a risk. For more, translate the following. It'll be the most research you've ever done.

01010011 01110100 01101111 01110000 00100000 01100001 01110011 01101011 01101001 01101110 01100111 00100000 01110011 01110100 01110101 01110000 01101001 01100100 00100000 01110001 01110101 01100101 01110011 01110100 01101001 01101111 01101110 01110011 00100000 01100001 01101110 01100100 00100000 01100100 01101111 00100000 01110011 01101111 01101101 01100101 00100000 01101111 01100110 00100000 01111001 01101111 01110101 01110010 00100000 01101111 01110111 01101110 00100000 01110010 01100101 01110011 01100101 01100001 01110010 01100011 01101000 00100001

slamedcat
07-21-2005, 06:45 PM
01010011 01110100 01101111 01110000 00100000 01100001 01110011 01101011 01101001 01101110 01100111 00100000 01110011 01110100 01110101 01110000 01101001 01100100 00100000 01110001 01110101 01100101 01110011 01110100 01101001 01101111 01101110 01110011 00100000 01100001 01101110 01100100 00100000 01100100 01101111 00100000 01110011 01101111 01101101 01100101 00100000 01101111 01100110 00100000 01111001 01101111 01110101 01110010 00100000 01101111 01110111 01101110 00100000 01110010 01100101 01110011 01100101 01100001 01110010 01100011 01101000 00100001


:giggle: :giggle: :giggle: :giggle: :giggle: :giggle: :giggle:
:rollin: :rollin: :rollin: :rollin: :rollin: :rollin:

ThunderbirdSport302
07-21-2005, 09:00 PM
well, at least y'all figgered out WTF he said...
I'm gonna look for a Stupid-to-English translation book, so I can see, too!
:disappoin :flame: :yuck: :bs: :locked:

Bird351
07-21-2005, 09:04 PM
My opinion?

MORE COWBELL!

CougarSE
07-21-2005, 11:03 PM
If you don't want a torn up part, buy it new or rebuilt, plain and simple. Used parts are always a risk. For more, translate the following. It'll be the most research you've ever done.

01010011 01110100 01101111 01110000 00100000 01100001 01110011 01101011 01101001 01101110 01100111 00100000 01110011 01110100 01110101 01110000 01101001 01100100 00100000 01110001 01110101 01100101 01110011 01110100 01101001 01101111 01101110 01110011 00100000 01100001 01101110 01100100 00100000 01100100 01101111 00100000 01110011 01101111 01101101 01100101 00100000 01101111 01100110 00100000 01111001 01101111 01110101 01110010 00100000 01101111 01110111 01101110 00100000 01110010 01100101 01110011 01100101 01100001 01110010 01100011 01101000 00100001



:flame: :giggle: :giggle: :giggle:

Ifixyawata
07-22-2005, 12:21 AM
Buy a Mustang.

V8Demon
07-22-2005, 09:27 AM
Buy a Mustang.

He's already intent on ruining one car. Don't encourage him to ruin two :hick:

slamedcat
07-22-2005, 01:01 PM
Buy a Mustang.

NO!
Play it safe buy a chevy.

Bird351
07-22-2005, 01:17 PM
Not just any Chevy.. a Chevette!

Tbird232ci
07-22-2005, 02:05 PM
hows bout a berlenetti?

slamedcat
07-22-2005, 03:30 PM
I got it a Yugo!
He woldn't have to worry about what would fit they never changed a thing in the entire how ever many year run.

Chuck W
07-22-2005, 03:36 PM
Christ, you make my head hurt. Do you have to repeatedly ask which side of the toilet paper you need to use when you wipe your ass?

Well, if you had read any of the other posts on this subject and done some reading you would realize that your 87 or 88 TBird has the 7.5 housing. Also, you would have read that the 87-88's 7.5 housing is wider than the early (83-85) 7.5 housing (which is the same as a Mustang), which is the same as the 8.8's. The axles do not interchange between the wide and narrow housings.

This is the last time this is going to be said ....... if you want to use a 8.8 housing AND keep the 4-lug then you need to use the axles and brake backing plates from an 83-85 Tbird/Cougar in the 8.8 housing to get the bearing surfaces to mate up and keep the track width.

Funky Cricket
07-22-2005, 03:42 PM
hey don't knock chevettes, my folks had one for 13 years.. had 250,000 on it, the front end finially just fell off it, only thing ever wrong was a valve that went bad.

NorCalAeroCoupe
08-18-2005, 08:30 AM
Geo !!!!!!

kyle2ooo
08-18-2005, 11:57 PM
[quote]MORE COWBELL![quote]

gotta love the cowbell!!!

CougarSE
08-19-2005, 12:10 AM
I've come to the conclusion that these tech forums are useless.

amooset
08-19-2005, 04:35 AM
Only if you're an igornant ass who constantly pressures the community to answer questions several times without so much as hitting a search button.

CougarSE
08-20-2005, 11:10 AM
I think each user should be able to vote on another user. So we can vote them off the board....... Haha Survivor parody.

V8Demon
08-20-2005, 06:09 PM
I think each user should be able to vote on another user. So we can vote them off the board....... Haha Survivor parody.


That's what Moderators are for. Besides then you could get voted off for nonsense.
Don't get me wrong. I'd love nothing better than to give this person consolation prize, send him on his way, and never hear from him again, but the biggest thing with him is the same uneducated and poorly thought out questions over and over again.

Looking back at it. He DOES give some entertainment value. I LOVE it when everyone fires stuff off at him. :flame: