PDA

View Full Version : test



P71
05-27-2007, 01:07 PM
test

daboss351
05-27-2007, 01:12 PM
egr block off plate for a 2.3?

P71
05-27-2007, 01:34 PM
A crappy $20 waste of ^%%&&$%## block off plate from a TF member. He advertised mill-cut 1/4" thick high-carbon plates and sent 1/8" sheet stock with holes that are too small and too close together that was cut by hand. Stupid thing is like $1 worth of materials and looks like he traced an EGR valve and the cut by hand making everything too small. To top it off he sent it in a standard envelope with a 37 cent stamp, so I had to pay 50 cents just to get it from my postman. When confrunted all he said was, "hey, it's only $20". He's the second biggest loser on my list after that @$$ Chuck Haug.

daboss351
05-27-2007, 03:02 PM
you need something made? i have acess to a milling machine for another week till school is out.

P71
05-27-2007, 03:35 PM
No, I just put the EGR on upside-down and capped the vacuum.

daboss351
05-27-2007, 03:36 PM
ok figured id offer, id make it for free if you wanted it

P71
05-27-2007, 03:45 PM
Have access to at least 1/4" steel? I can send you a template.

daboss351
05-27-2007, 04:06 PM
i believe so, my schools got tons of steel i can use