View Full Version : Converting to 5 lug
01-25-2005, 10:00 PM
Hey guys what is the cheapest way to convert to 5 lug? For the front I already have the mustang spindles and 5 lug rotors. For the rear end I got a 89 mustang diff 8.8 I heard ranger axles will work but not sure. Will any other axles from other cars be interchangable thanks guys lmk.
01-25-2005, 10:58 PM
Using the Ranger axles will pull the wheels in 3/4" on each side. The 94-98 Mustangs axles are the same length as the TBirds. I'm not 100% certain (haven't messed with drums on a Fox in a while), but I think the TBirds and Mustangs use the same drums, if that's the case, then you "should" be able to use the SN-95 Mustang axles and a pair of Ranger drums (you might need to turn down the "hub" on the center of the axles to fit the smaller holes in the drums)
01-26-2005, 06:55 AM
Two right side Ranger axle shafts will work great.
Powered by vBulletin® Version 4.2.1 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.