Activity Stream

Nice, been a long time since I posted on the forums. Had trouble with sign on for awhile, and basically gave up. Decided to drop in and check on...

I'd heard that about the pistol length gas system, but carbine length is used fairly commonly as well in 16 barrels (only) . 300BLK uses a lot of...

yeah, 556 wouldn't really scare me too much, the 300 you were talking about is why I was concerned. Since the 300 almost always uses pistol length...

Yeah, I read about the new VP9b a few days ago on the Walther forum....seems to be the American thing, Walther is getting away from the paddle...

Here's a few pictures of the underside of the car before I had to take everything apart.

Had a set back. Got done with the installation, started putting in the oil, coolant, etc. Noticed a puddle of engine oil under the car. It was...

Using the BBK equal length headers I only have a problem with #4. Not near what it used to be with all the crap in the way. My car is not a daily...

The man and woman in the Thunderbird and the man in the Cougar have some great 80's hair going on.

Btw have you fired the new engine up yet?

My car has FRPP GT40P stainless steel headers. When it had GT40P heads I had to use the same combination of a spark plug socket and a ratcheting...

If anyone plans on converting the stock head unit connector to RCA connectors the positive (center) of the right RCA jack goes to the pink wire with...

Stop bragging and send me a rust free left front fender :D

HK just released a push-button VP9. Might be the first push-button HK ever. Might as well, though, their paddles are uselessly short. BTW, range...

Or Arizona, it's finally nice out here now.

So i'm guessing the sn95 sway bars would be wider?

Try Southern Nevada.

Motor is a .030 over 1991 5.0. Balanced, stock crank ground .010, Eagle SIR "I" Beam rods, 3/8 ARP rod bolts, pistons are Trick Flow/Wiseco,...

Motor mounts I am using are 1988 Lincoln LSC.

Here's another look at the steering shaft clearance.

It's a pretty tight fit on mine also.

I've also seen SN95 sway bars used. I don't believe that there is any benefit over fox body bars, but it is another option.

Those are BBK equal length headers. I don't know if they are factory headers.

The worst part is getting the spark plug boots off. I usually coat them with dielectric grease. Getting the plugs out takes a combination of tools. I...

I have a harness out of an 88 ranger with a 2.9 for a project for my Bronco II, in the untaping I found several resistors just like that one. I...

Know where I could find any pics? Would love to see them. I guess a console would be required for my seats, windows, and mirrors.

Mark 7 seats fit. I've seen them in cougar birds at the junkyard.